CounterSign Book a conversationLet's talk
Credential rotation for OT & SCADA

Rotate every field password. Prove every change.

CounterSign Software is being built to change the credentials on your RTUs, flow computers, PLCs, network gear and servers. It's designed to work through your own jump host, inside your maintenance windows, and leave a record your auditor can read.

Vault-backedVerify before commitFail-safe by designFull audit trail
Simulated fleet
RTU-BK-014198.51.100.14
credential rotated · verified4.2 s
Sound familiar?

Field passwords outlive the people who know them.

COMMISSIONING DAY
Set once, never changed.

The password that went in when the RTU was commissioned is still the password today, and it's the same on the units next to it.

OFFBOARDING
The contractor left. The password didn't.

Shared accounts mean everyone who ever had access still has it. Changing it by hand across a basin is a week of truck rolls.

AUDIT DAY
Evidence lives in a spreadsheet.

When the auditor asks when a credential last changed and who changed it, the answer is someone's best recollection.

Interactive preview · simulated devices

Watch a rotation, step by step.

Click any instrument to select it, then rotate it. Close the maintenance window or inject a failure to see how CounterSign Software is designed to protect the plant.

consoleenv: DEMO · SAMPLE FLEETpath: via jump host SIMULATION · no real devices
Vaultversioned secrets CounterSignrotation engine Jump hostcustomer-owned field segment · ISA-5.1 tags
Audit trail
TimeDeviceResultDurationOperatorReason
How a rotation works

Four steps, designed to run the same way on every device.

STEP 1

Pull from the vault

CounterSign Software will authenticate to your vault and check out the device's current credential, so passwords don't end up in config files or on laptops.

vault: token issued · scope=read/write device secrets
STEP 2

Reach it through your jump host

Sessions are designed to run through the jump host you already control, over the network paths you already have, with nothing to install on the device.

ssh via jump host → 198.51.100.14
STEP 3

Change it, then prove it

CounterSign Software will generate and apply a new credential, then log back in with it before committing anything. If that check fails, the old credential stays valid.

verify: login ok with new credential
STEP 4

Record and revoke

The new version will be written to the vault and the previous one revoked, with an audit entry capturing who, what, when and why.

audit: rotated · 4.2 s · reason=scheduled
Built for the field

Designed by people who have stood in the control room.

Maintenance windows

Each device group can have its own window, such as RTUs on Saturday at 2 a.m. and core switches on Sunday at 1 a.m. Outside the window, devices will be skipped, not forced.

gas-rtu: Sat 02:00–06:00

Concurrency limits

Set how many devices in a group can change at once, so you won't touch every compressor PLC on a site at the same moment.

compressor-plc: max 2 concurrent

Fails safe

No acknowledgment, no verified login, no vault write. A failed rotation is designed to leave the device on its last known-good credential and flag it for a person.

abort → previous version stays current

Same-day offboarding

Scoped rotation will be able to change every credential a person could have known, by group, location or device list. A reason will be required, and only Incident Admins will be able to run it.

scope: group=gas-rtu · reason required

Role-based control

Operators will be able to rotate single devices, while fleet-wide and incident rotations will need an Incident Admin. Every action will be tied to a named person.

roles: operator · incident admin

Planned for the whole fleet

Planned support for SCADA RTUs, PLCs, network gear, Linux and Windows servers, with each vendor's change and verify sequence built in.

handlers: rtu · plc · cisco · linux · windows
The cost of doing it by hand

Run your own numbers.

Move the sliders to match your fleet. Nothing here is our estimate. The math uses only what you enter.

RTUs, flow computers, PLCs, switches, firewalls, servers
Include travel, change, test and paperwork
Your policy, or what your auditors expect
Straight-time rate, before benefits and overtime
Labor cost saved per year with CounterSign Software
$0per year
Hands-on hours below × technician wage. Assumes the change work itself is automated. Truck, fuel and overtime costs are not included.
Hands-on hours per year, manual
0hours
How long a departed person's password stays valid
Manual
CounterSign Software
same day
Manual worst case is the gap between scheduled changes. With CounterSign Software, a scoped rotation is designed to close it as soon as you run it.
Compliance evidence

Designed to produce the evidence regulators ask for.

TSA SD PIPELINE-2021-02 SERIES

Pipeline security directive

A schedule for required static password resets, and limits so people who no longer need access don't know shared-account passwords.

CounterSign Software is designed to run the schedule, rotate shared accounts on offboarding, and keep the record.

Read the directive ↗
NERC CIP-007-6 · R5

System access control

Change known default passwords, and change passwords at least once every 15 calendar months.

Built around a cadence per device group, with overdue devices flagged red and every change timestamped and attributed.

Read the standard ↗
ISA/IEC 62443-3-3 · SR 1.5

Authenticator management

Initialize, change and protect authenticators across the control system.

Credentials will be generated to policy, held only in the vault, verified on the device, and revoked when replaced.

About ISA/IEC 62443 ↗

Requirement summaries are paraphrased. CounterSign Software is designed to produce records that support these programs. Your compliance determination stays with your organization and its auditors.

CounterSign Software logo
Why CounterSign Software

Made for operations, by operations.

As OT and ICS networks connect to IT, password management on field devices has become a real risk to critical infrastructure. Most tools built for IT credentials don't understand RTUs, maintenance windows or what happens when a compressor drops off SCADA.

Our mission is to secure operational technology without putting uptime at risk. CounterSign Software was designed by people who have run SCADA and measurement in midstream oil and gas, and it's being built to behave the way field operations expect.

Book a conversation

Let's talk about your fleet.

CounterSign Software is in active development. Tell us what's in your fleet and how you handle passwords today, and help shape what we build first.

01A 30-minute conversation about your fleet and policies
02A look at the design and how rotation will work
03Updates as development moves forward
support@countersignai.com